 |
||||||||||||||||||
SPINNAKER COLOR SELECTIONReturn to Spinnakers for information about cruising and racing spinnakers, product overviews and the Neil Pryde spinnaker layouts. This
page enables you to select the type of spinnaker based on the "J"
measurement (mast to bow) of your boat and choose the color layout.
Our color diagrams are quite accurate representations of the finished
product, however, variations of panel widths (but not numbers of
panels) will happen based on the aspect ratio of your rig. We will
attempt to match your colors and design as close as possible. Colors
you see here will vary depending on screen and printer output. These
should be used for reference only. Fluorescent colors tend not to be
U.V. colorfast and will fade more quickly than other colors. And one
final note; as each color of fabric comes from a different roll of
fabric and can vary slightly, we tend to emphasize the importance of a
limited palate of colors to avoid differences between different
colors. Given this, we believe that from a racing standpoint a single
color would represent the best in performance. To view of page of sample color layouts, go here. Instructions for pc users:
|
||||||||||||||||||
and selecting the color from the color squares on screen. Next use
the Paint Bucket tool
to 'pour' colors into each panel.
